We can help you? Call us: (+34) 952 241 111
Product of the month of March
The chemical product of the month is Waterproofing for covers and roofs.
It is available in different colors: white , blue , gray , green , brown , red , black and transparent .
Characteristics
Waterproofing and insulating.
It forms a perfectly adhered, elastic and resistant layer.
It performs the expansion and contraction of temperature changes, without breaking and avoiding water leaks.
It is the ideal product when you want to apply waterproofing and insulating properties to terraces, roofs, decks, concrete, etc.
Once dry, it forms a perfectly adhered layer without any joint and completely elastic (expansion coefficient between 200 and 300%).
It penetrates into fissures and cracks, allowing the expansion and contraction movements of the surfaces where it is applied without breaking, thus avoiding water leaks.
Aging tests carried out on specimens prepared following the same standardized method of applying the product resulted in no anomalies being observed after five hundred hours of accelerated aging.
How to use
It is available in different colors: white , blue , gray , green , brown , red , black and transparent .
Characteristics
Waterproofing and insulating.
It forms a perfectly adhered, elastic and resistant layer.
It performs the expansion and contraction of temperature changes, without breaking and avoiding water leaks.
It is the ideal product when you want to apply waterproofing and insulating properties to terraces, roofs, decks, concrete, etc.
Once dry, it forms a perfectly adhered layer without any joint and completely elastic (expansion coefficient between 200 and 300%).
It penetrates into fissures and cracks, allowing the expansion and contraction movements of the surfaces where it is applied without breaking, thus avoiding water leaks.
Aging tests carried out on specimens prepared following the same standardized method of applying the product resulted in no anomalies being observed after five hundred hours of accelerated aging.
How to use
- The surface is cleaned.
- Once dry, it is treated with the product with a brush, roller, brush or pressure.
New Construction: a first coat of the product diluted with 25% water is applied. After 24 hours, a second coat of the pure product is applied.
Previously treated surface: Areas in poor condition are eliminated and diluted 3/1 in water will be applied to those points. After drying, 12 or 24 depending on the time, the entire surface is treated. - Finally, the final layer with the pure product is applied.